IPG Pool Maintenance Chemicals

Pool Maintenance

Please note: Not all products are in-stock and may require to be ordered. Please call store for inventory details.

Please note: Not all products are stocked and may require to be ordered. Please call store for inventory details.

<< Back

Stain Prevent

Item ID: (30-21121-11)
Brand: IPG

STAIN PREVENT ELIMINATES MINERALS Quality controlled formula. A mixture of water conditioners which makes pools minerals and metals inactive.Contains chelation agent. Liquid concentrate.pH 0.75. Prevents corrosion of the pool equipment. Eliminates and prevents tartar build up on the inner surfaces of the pool without affecting the pH of water.

Buy30-21121-11

Pool Sparkle

Item ID: (30-21080-11)
Brand: IPG

POOL SPARKLE

CONCENTRATED CLARIFIER

30-21080

Provides clear and sparkling water.

A very powerful formula.

POOL SPARKLE enhances the effectiveness of the filtering system by coagulating microscopic particles to larger masses.

The solids thus formed are deposited at the bottom of the pool or are captured by the filtration system.

POOL SPARKLE is not affected by chlorine, does not contain alum and is efficient in any pH condition without modification.

POOL SPARKLE is used while the filtration system is working.

1. Initial treatment: add 50 mL of POOL SPARKLE per 10,000 L of pool water. Pour around the pool.

2. After 8 hours of filtration, if the maximum recommended pressure has been reached, clean the filter medium by backwashing the filtration system.

3. If needed, clean the bottom of the pool.

4. Adding 50 mL of POOL SPARKLE per 10,000 L of pool water on a weekly basis will help keep pool water clear and sparkling.

5. For very cloudy water due to high hardness levels, airborne dust or dead algae: pour 250 mL of POOL SPARKLE per 10,000 L of pool water.

Buy30-21080-11

Terminator

Item ID: (30-21110-11)
Brand: IPG

When you start your pool, at springtime or during the regular season, shock treatments are required and a waiting period is necessary until the residual value has dropped to the recommended levels of 1 to 3 ppm.

If you wish to decrease the sanitizer residual rapidly, use TERMINATOR and take advantage of your pool immediately. TERMINATOR will not affect the colouring of vinyl, cement or fibreglass pools.

Application:

To reduce sanitizer level before using your pool:

1. Test the sanitizer level. If readings are higher than 3 ppm, add TERMINATOR in small quantities (50 ml per 10,000 L of pool water) to reduce high sanitizer level back to acceptable levels 1-3 ppm.
2. Wait for 1 hour.
3. After adding TERMINATOR, check water's pH and adjust to 7.2-7.8 if necessary.

RECOMMENDATION:
Do not exceed dosage. Use in small increments and test water between additions of this product

Buy30-21110-11

Meta Ban

Item ID: (30-21335-11)
Brand: IPG

Treats all water sources.

A granular sequestrant that helps remove quickly water discoloration in swimming pools from the presence of metals such as manganese, iron and copper.

Can also be used to remove staining on every type of swimming pool surface due to metal.

Concentrate quality formula

Does not alter pH and is compatible with any types of sanitizers

Do not make water cloudy

May be used for the whole season with all types of filters:

Sand
Cartridge
Diatomaceous earth filter

Application

1. Adjust pH between 6.8 - 7.2 and let the chlorine level drop below 2 ppm.
2. For pool water discoloration, pour 150 g of METABAN per 10,000 L of pool water directly over the swimming pool surface. For stain removal, proceed to # 3.
3. Brush affected areas.
4. Add 150 g of MET ABAN per 10,000 L of pool water to a pail of water and apply the concentrated solution along the pool walls and/or in areas where staining is present. Where stains are most prevalent directly brush with the product.
5. Severe staining of surfaces may require up to 300 g of METABAN per 10,000 L of pool water.
6. Allow the circulation system to run continuously for 24 hours.
7. After 24 hours, adjust pH between 7.2 - 7.8 and alkalinity between 80 - 120 ppm.
8. Do not superchlorinate water for at least 72 hours.
9. Continue to use METABAN on a weekly basis to prevent the reoccurrence of staining of swimming pool surfaces or water discoloration.

Buy30-21335-11